Iflash drive colli install#

Slide battery cable in to the connector and push down the black latch to lock the ribbon in place. Fold the piece in half for thick case back iPods. Remove the protective outer sheets from the thermal gap filler before placing on top of the mSata drive. Insert the mSata drive fully in to the connector at an angle, then gently push down till it locks on the iFlash-Sata.

Iflash drive colli install#

Install iFlash-Sata board in to iPod, Make sure ribbon is fully home and the black bar is locked down. The main component houses the 16GB of flash memory, and has a microUSB connection on one side (for plugging into Android phones and. SanDisk - 256GB iXpand Flash Drive Luxe for iPhone Lightning and Type-C Devices - Black. iPod is ready to accept the iFlash board. The i-FlashDrive is one drive with three different pieces.

Remove all rubber bumpers and strips from the iPods if any remain after the HDD is removed. 2200 South West Bypass regarding two motor vehicles involved in a head-on colli. Gently lift the black bar to release the ribbon from the HDD. Benjamin Turner, 23, from Springfield was driving a black 1998 Triumph. Rest the front and back side by side, be careful to not cause too much stress on the headphone ribbon.īefore pulling the case apart, release the battery cable – lift the black lock bar -or- gently using even pressure pull up the battery ribbon away from the connector. I suggest watching some iPod opening videos on the internet. A Kingston card reader which accepts Micro SD memory cards (Transcend card shown partially inserted), and acts as a USB flash drive. Using suitable tools, release the holding clips, making your way around the case till it opens.